0800 215 104
sales@pumpworks.co.nz
16/10 Olive Road, Penrose, Auckland 1061
Account
$0.00 0

Cart

Free Shipping on purchases above $2500. NZ only.

No products in the cart.

Continue shopping

Here are a few of the most common pump problems and how to navigate them yourself.

Pumps have an important role in a range of industries, but sometimes they can encounter problems that affect their productivity. This page will offer some solutions on how to navigate some of the most common pump predicaments.

Low pressure:

Not enough pressure from a pump can get in the way of the pump doing its job properly. If you suspect that your pump has low pressure, follow these steps:

Firstly, check the pump’s suction line for any blockages. Then, inspect for excessive wear or damage and if needed, clean or replace the impeller. Next, make sure the pump is running at the correct speed and has the right power supply. If you’ve followed these steps and the problem is still there, seek a New Zealand pump professional to take a look.

Motor failures:

Motor failures can result from several electrical or mechanical issues. Here’s how to diagnose and resolve motor-related predicaments:

Firstly, check if the power supply is adequate for the pump in terms of voltage and capacity. Then, inspect the motor for any visible signs or damage such as burnt wiring. Next, ensure the motor’s bearings are properly lubricated and able to function well. If the motor continues to malfunction, it’s a good idea to seek advice from a professional engineer to take a look at the pump and machinery components.

Improper flow:

Inadequate flow can occur as a result of blockages or even just design problems. Here’s what you can do:

Check the suction line and inlet of the pump for any noticeable diaphragm pump problems or obstructions. If you notice any, remove them to allow a smooth flow of fluid. You then need to ensure that the impeller is aligned correctly. Check with the manufacturer’s guidelines and adjust accordingly. Finally, take a close look at the design to see if it’s properly designed for your desired flow rate. As always, make sure to consult a professional if the issue remains.

By following the above advice, you can identify and navigate common pump predicaments such as diagram pump problems, motor failures or improper flow.

The key thing to remember is that if you’re not able to resolve the issue on your own, reach out to us. We can send a qualified professional to you 24/7. If you’re worried that a repair or rebuild will leave you without a pump, make sure to enquire about our pump hire services in the interim.

Pumpworks Logo White
With a passion for solutions, we at PumpWorks get our satisfaction from working with our clients. Pumpworks custom design, custom build and deliver!

Supplying brands and products for the Chemical and Pharmaceutical, Food and Wine, Oil and Gas, Water and Wastewater industries, we understand what is required and what works.
© Copyright - PumpWorks. All Rights Reserved. | Designed by
Numero Logo
Payment Method

How can we help?